Heat & Glo Fireplace HEAT & GLOW XLR-N-AU User Manual

Page 48

Advertising

Heat & Glo • XLR-N-AU, XLR-PB-AU • 2198-906 Rev. o • 1/13

Note: The lower cover panel must be pushed all the way

down. The outer finishing flanges should line up. The

fireplace opening must be between 15-3/4 in. and 16

in. (400 mm and 410 mm) for the decorative fronts to fit

correctly. See Figure 13.4, Figure 13.5 and Figure 13.6.
Sealing Joints
All joints between the factory-installed non-combustible

board and 3/8 in. (10 mm) building material (dry wall,

plywood, wood composites, etc.) can be taped and sealed

with combustible drywall tape.

FIREPLACE OPENING

15-3/4 in. TO 16 in.

(400 mm TO 410 mm)

Figure 13.4 Required Fireplace Opening Height

Figure 13.5 Lower Cover Panel Positioned Incorrectly.

Figure 13.6 Lower Cover Panel Positioned Correctly

LOWER FINISH FLANGE

RIGHT SIDE

FINISH

FLANGE