Heat & Glo Fireplace HEAT & GLOW XLR-N-AU - Manual (Page 52)

Heat & Glo • XLR-N-AU, XLR-PB-AU • 2198-906 Rev. o • 1/13 52
D. Decorative Fronts
WARNING! Risk of Fire! A decorative front is required
for this model. DO NOT operate this appliance without a
decorative front in place.
Only doors certified for use with this appliance model may
be used. Contact your dealer for a list of doors that may
be used.
Figure 13.17. Dimensions of Tonic Decorative Front.
TONIC DECORATIVE FRONT
(TN-SLR-**)
MARTINI DECORATIVE FRONT
(MT-SLR-**)
Figure 13.15 Tonic Decorative Front
Figure 13.16 Martini Decorative Front
Inside and Overlap Fit
See Section 13.C.
Overlap Fit Only
See Section 13.C.
A
B
D
C
E F
TONIC FRONT
Table 1. Dimensions of Tonic Decorative Front.
A Top of decorative front to bottom of appliance.
26 in.
(670 mm)
B Bottom of decorative front to bottom of appliance.
7 in.
(175 mm)
C Inside dimension of decorative front (width).
39 in.
(991 mm)
D Outside dimension of decorative front (width).
44-1/2 in.
(1.13 m)
E Inside dimension decorative front (height).
13 in.
327 mm
F Outside dimension of decorative front (height).
19-1/2 in.
495 mm