Henny Penny CW-114 - Manual (Page 10)

Model CW-216/CW-114
2-3. LIGHT BULB 3. Replace the light bulb with a Westinghouse
(Continued) #60A19/35, 130 Volt bulb.
If this bulb is not available, a standard 60 watt bulb
will work until a long life bulb can be obtained.
4. Replace the glass panel.
2-4. FUSE
If all light bulbs go out at once:
1. Turn off the light switch.
2. Locate the fuse holder, next to light switch, and remove the
cap by turning it counterclockwise.
3. Pull the fuse from the holder.
4. Replace the fuse with a new 15 amp fuse.
5. Replace the cap.
6. Turn on the lights.
2-5. CLEANING WATER 1. Remove electrical power supplied to the cabinet.
STRAINER
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
2. Shut off the water supply.
2-2 103