Henny Penny CW-114 - Manual (Page 6)

Model CW-216/CW-114
PROBLEM CAUSE CORRECTION
THERMOMETER
A. Reading does
not match
actual
temperature
A. Product not
holding
temperature
• Faulty thermometer
• Insert bulb in block
• Replace per Thermometer Section
• Thermometer bulb is not in
holding block
OPERATIONS
• Doors are not kept closed • Keep doors closed when possible
• Product held too long
1-2 103
• Water temperature too low
• Radiant heat too low
• Radiant heat not working
• Light bulbs out
• Only hold product for recommended
times
• Check water heating system per
Water Pan Heater Section
• Turn to higher setting
• Check radiant heat system per
Radiant Heater Section
• Replace as required, per
Light Bulb Section
B. Doors are
fogging
• Doors left open too much
allowing doors to cool and
cause condensation
• Radiant heat not high enough
• Radiant heat not working
• Water temperature too high
• Keep doors closed when
possible
• Turn to higher setting
• Check radiant heater per
Radiant Heater Section
• See recommended settings
and temperature
1-3. TROUBLESHOOTING (Continued)