Henny Penny CW-114 - Manual (Page 12)

Model CW-216/CW-114
2-6. WATER STRAINER 1. Remove electrical power supplied to the cabinet.
(REPLACEMENT)
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
2. Shut off the water supply.
3. Remove the control side end panel.
4. Disconnect the water supply tubing.
5. Remove the brass elbow.
6. Remove the water strainer.
7. Install a new water strainer.
8. Reassemble in reverse order.
9. Turn the water supply on and check for leaks.
10. Replace end panel.
11. Turn on the power supply at the breaker box.
2-7. WATER VALVE 1. Remove electrical power supplied to the cabinet.
To avoid electrical shock or property damage, move the
power switch to OFF and disconnect main circuit
breaker, or unplug cord at wall receptacle.
2. Shut off the water supply.
3. Remove the control side end panel.
2-4 103