Hitachi SJ2-CO - Manual (Page 33)

CHAPTER7 COMMUNICATION OBJECTS LISTS
29
INDEX Parameter Function Name Size Unit Note
0x2877 C077 Comm. Error time 2 0.01sec
0x2878 C078 Communication waiting time 2 1.msec
0x2881 C081 O input scan calibration 2 0.1%
0x2882 C082 OI input scan calibration 2 0.1%
0x2885 C085 Thermistor adj. 2 0.1%
0x2886 C086 AM offset adjustment 2 0.1V
0x2891 C091 Debug mode enable 1 -
0x28A1 C101 UP/DWN selection 1 -
0x28A2 C102 Reset selection 1 -
0x28E1 C141 Logic output1 1 -
0x28E2 C142 Logic output2 1 -
0x28E3 C143 AND/OR/XOR select 1 -
0x28E4 C144 ON delay time (OUTPUT11) 2 0.1sec
0x28E5 C145 OFF delay time (OUTPUT11) 2 0.1sec
0x28E6 C146 ON delay time (OUTPUT12) 2 0.1sec
0x28E7 C147 OFF delay time (OUTPUT12) 2 0.1sec
0x28E8 C148 ON delay time (RY) 2 0.1sec
0x28E9 C149 OFF delay time (RY) 2 0.1sec
0x2A03 H003 1st allowable motor capacity 1 -
0x2B03 H203 2nd allowable motor capacity 1 -
0x2A04 H004 1st motor pole setting 1 -
0x2B04 H204 2nd motor pole setting 1 -
0x2A06 H006 1st stabilizing factor 2 1.%
0x2B06 H206 2nd stabilizing factor 2 1.%
0x2A07 H007 1st motor voltage select 1 -
0x2B07 H207 2nd motor voltage select 1 -
0x2F44 P044
Timer setting of communication timeout Whilst
running
2 0.1sec
0x2F45 P045 Inverter action When communication error. 1 -
0x2F46 P046 Polled I/O OUTPUT Instance number 1 -
0x2F47 P047 Polled I/O INPUT Instance number 1 -
0x2F48 P048 Inverter action When Idle mode detected. 1 -
0x2F49 P049 Motor poles setting for revolution per minute 1 -
7.4 Saving Parameters to EEPROM
The purpose of this object is to save all inverter parameter to the Inverter’s EEPROM.
INDEX Function Name Size Note
0x2F00 EEPROM write command 1
The object 0x2F00 is a placeholder for issuing the EEPROM write command. A rising edge 0 -> 1
will start the EEPROM writing process. The method of making edge is write “0” this object then
write “1”. While the object 0x2F00 is set “1”, the inverter is writing data to EEPROM. When
finished writing to EEPROM, this object is going to set “0” in automatically. Please surveillance
this object, during writing data to EEPROM.