HP sv6 - Manual (Page 39)

installation and user information
installation process
Chapter 2 39
Adequate ventilation and cable pathways should be provided
between all machines. Refer to the hp visualization center sv6 Site
Prep Guide for the specifications for your configuration.
2. Position console monitors
Set up console monitor(s) according to their respective installation
instructions. Pay close attention to both ergonomic positioning
recommendations and the monitor’s relationship to a wide field
display option if it is used.
See the “Working In Comfort” documentation at
http://www.hp.com/ergo for complete information on safely
preparing your work environment and other ergonomic issues.
3. Connect Power, I/O Devices
If you have multiple racks, connect them as indicated by the labels
on the disconnected cables. Use the diagram below as a general cable
reference:
Figure 2-11 Workstation Cabling
• See power, space, and cooling requirements in the hp
visualization center sv6 Site Prep Guide.