HP sv6 - Manual (Page 67)

installation and user information
how to use hp visualization center sv6 tools
Chapter 2 67
Hewlett-Packard Visualize Center sv6
NAME
setpipes - sv6 Pipe Configuration Tool
SYNOPSIS (sv6 Configuration)
setpipes [options]
[options]
-h - Arrange Pipes in Horizontal Bands
-v - Arrange Pipes in Vertical Stripes
-grid - Arrange Pipes in a Regular Grid
-full - Each Pipe covers the entire screen
-pane - Arrange Pipes in a “Pane”
-pr l r t b - Pane Rectangle: Specifies the inner pane
rectangle in terms of percentages from the
left, right, top, and bottom of the screen
-po <mode> - Pane Orientation: Specifies the orientation
of the Pipes within the Pane. This can be
either h,v or grid.
-samples [ 2 | 4 | 8 | 16 ] - Number of jitter samples per
Pipe
-jf <file> - Read jitter values from file <file>
-js <scale> - Scale the jitter values by <scale>
-show - Show Pipe Rectangle indicators on the display
-hide - Hide Pipe Rectangle indicators on the display
-xdist x1 x2 ... - X Distribution percentage of each Pipe
relative to the screen width
-ydist y1 y2 ... - Y Distribution percentage of each Pipe
relative to the screen height
SYNOPSIS (sv6 VisCenter Configuration)
setpipes [glob_options] -0 [Master 0 Options]
-1 [Master 1 Options]
-2 [Master 2 Options]
[glob_options]
-show, -hide, -samples, -jf, -js
[Master <x> Options]
-h, -v, -grid, -pane, -full, -samples, -js,
-show, -hide -pr, -po, -xdist, -ydist
DESCRIPTION