HP sv6 - Manual (Page 89)

file configuration
Chapter 3 89
# The form for each entry is:
# <internet address> <official hostname> <aliases>
# For example:
# 192.1.2.34 hpfcrm loghost
# See the hosts(4) manual page for more information.
# Note: The entries cannot be preceded by a space.
#DNS Server (optional)
15.6.180.221 dsnx.my.site dsnx
15.1.170.0 myvis #10/100 Ip8 hostname
127.0.0.1 localhost loopback
#sv6 10/100 LAN host information
#Automatically generated, customize for your site.
15.1.170.1 sv1x sv1x
15.1.170.2 sv2x sv2x
15.1.170.3 sv3x sv3x
.
.
.
15.1.170.8 sv8x sv8x
#sv6 Gigbit host information
# Do not change
192.168.1.1 svm
192.168.1.2 sv1
192.168.1.3 sv2
192.168.1.4 sv3
192.168.1.5 sv4
192.168.1.6 sv5
192.168.1.7 sv6
192.168.1.8 sv7
192.168.1.9 sv8
• /etc/rc.config.d/netconf - On all systems, the lan1 section
specifies the IP address that corresponds with the HP ProCurve
Gigabit Ethernet module (J4115B) that was assigned in the
/etc/hosts file. The lan0 section and hostname specify the 10/100
LAN information.
#/etc/rc.config.d/netconf
# netconf: configuration values for core networking subsystems
HOSTNAME=”svm”
OPERATING_SYSTEM=HP-UX
LOOPBACK_ADRESS=127.0.0.1