Meridian Audio 568 - Manual (Page 103)

96
Configuring the digital surround processor using a computer
The final stage in editing the settings is to configure the general
Setup options.
To change the setup options
● Click the Setup icon in the left-hand panel of the Meridian
window.
The Setup options will be displayed:
The options are described in the following table:
Option What it means
Lock settings on Locks the DSP preset parameters.
product
On-screen display Specifies the default position of the
position on-screen display.
Multi-room displays Includes displays of information from
Meridian sources; eg CD track number or
FM tuner frequency.
Diagnostic displays Includes diagnostic displays in the
display options.
Fan Sets the fan operation, if fitted.
Volume on startup Specifies the volume selected on
switching on at the back panel.
Comms controller Specifies whether the 568 is controller,
status not controller, or set automatically.
System and Copy For multi-room setups.
address
Changing the setup options