Not working, Starting dts laserdiscs, Sound not clear – Meridian Audio 568 User Manual

Page 117: Centre not working, There is a hiss when starting dts laserdiscs

Advertising
background image

110

Troubleshooting

Sound not clear

❍ If speech sounds muffled in a system with a centre speaker,

check that sound is coming from the centre as there may be a

connection problem. In a digital or Meridian feed to the centre

you may have set it up to be right instead of left so that it is

playing a subwoofer signal.

❍ If speech sounds muffled in a system with no centre speaker,

you may have selected a layout that expects one. See To

specify the speaker layout, page 85.

Centre not working

There may be a connection problem.

❍ In a digital or Meridian feed to the centre, you may have set it

up to be right instead of left, and therefore it may be playing a

subwoofer signal.

There is a hiss when starting DTS
LaserDiscs

The DTS audio stream is indistinguishable from a PCM audio

stream; the 568 takes 30ms to identify the encoding, during

which a hiss is heard.

❍ With non-video DTS sources you can add a 30ms delay to

avoid this.

❍ With video sources you can create a DTS-only source to avoid

any hiss.

Advertising