Meridian Audio 568 - Manual (Page 62)

Setting up the digital surround processor
55
On-screen display
Video lead
568 Digital Surround Processor
VIDEO OUT
VIDEO
IN
Video Source
(eg 562V, 581, or DVD Player)
MONITOR
IN
Television/Monitor
OUT
If your surround system includes video the 568 can add a text
overlay to the video signal, to provide additional information
about its operation in the form of a textual on-screen display
(OSD). In normal operation this repeats the information provided
on the 568 front panel display. During calibration the on-screen
display provides additional guidelines to help you perform the
calibration sequence.
● Connect either the composite or S-video output from the
video source to the appropriate VIDEO IN socket on the 568
Digital Surround Processor.
● Connect the corresponding VIDEO OUT socket from the 568
to the television or monitor.
The on-screen display automatically locks to an NTSC, PAL, or
SECAM signal, and requires an input signal to operate. The
video circuits in the 568 are of broadcast quality, and passing
the video signal through the digital surround processor will not
affect its quality.
Connecting video