Meridian Audio 568 - Manual (Page 94)

Configuring the digital surround processor using a computer
87
Centre
Use the Centre drop-down menus to specify which presets use
the centre speaker, and its size and type.
● From the first drop-down menu choose one of the following
options:
Option Description
None If you do not have a centre speaker.
Movies only If you want to use the centre speaker for
Logic and 5.1 Movie DSP presets only.
Movies and music If you want to use the centre speaker for
all presets.
● From the second drop-down menu specify the type of the
centre speaker; the options are as for the main speakers.
Surrounds
Use the Surrounds drop-down menus to specify the number
and type of the surround speakers.
● From the first drop-down menu specify the number of rear
speakers and side speakers you have in your surround system.
● Use the Sides and Rears drop-down menus to specify the
type of the rear and side speakers.
Subwoofers
● Use the Subwoofers drop-down menus to specify the
number of subwoofers, and the DSP presets that use them.
If your main left and right speakers are small you will need to use
one or more subwoofers to handle the bass. You can choose
between appropriate combinations of mono (front), centre, left
and right, or surround.
If your main left and right speakers are large you can use one or
more subwoofers to augment the bass from the centre channel.
With 5.1 sources an additional option is to use the subwoofer
only for the LFE channel.
You can specify a different subwoofer configuration for Music,
Logic, and 5.1 Movie DSP presets.
The Advanced checkbox is for dealer use only, and it is
recommended that you leave this unchecked unless you have
special requirements.