Meridian Audio 568 - Manual (Page 38)

Defining your own presets
31
Changing the spaciousness of the sound
If you have side speakers an additional S Delay option allows
you to adjust the delay on the side speakers between 15ms and
30ms. Note that for best results you should never set the
S Delay to be less than the R Delay.
You can adjust the spaciousness of the sound by altering the
delay on the rear and side channels.
Note that these adjustments are not available for the Direct,
Stereo, or Mono presets.
To change the relative delay of the
rear or side speakers
● Press > or < (remote) until the display shows the speaker(s)
you want to adjust.
For example:
R Delay 15.0
● Press A or V (remote) to change the relative delay of the
speakers.
The range of possible values depends on the preset. With the
music presets (Music, Trifield, and Ambisonic) you can change
the rear delay between 0ms and 30ms, which is equivalent to
moving the rear speakers 30 feet away.
The 5.1 Movie presets allow you to vary the delay between 0ms
and 15ms, and the Logic presets allow you to vary it between
15ms and 30ms.