Changing the dsp preset for a source, Dsp preset, assigning to a source, Assigning dsp preset – Meridian Audio 568 User Manual
Page 40
Defining your own presets
33
Each source has an appropriate DSP preset associated with it
for each music format. For example, for a standard stereo (PCM)
signal the CD source uses Trifield and the TV source uses
TV Logic.
This section explains how to change the DSP preset associated
with any source.
To change the DSP preset for a
source
●
Make sure the menus are unlocked; see To unlock the menus,
●
Select the source you want to change, by pressing the
Source key on the front panel or the appropriate source key
on the remote; eg CD.
●
If necessary, select a signal in the appropriate format. For
example, to change the DSP preset used for DTS compact
discs, play a DTS CD.
●
Press Preset (front panel or remote) to select the DSP preset
you want to associate with the source.
For example:
Trifield
●
Press Store (front panel) to save the new association.
The display shows the source and
preset you have stored; for example:
CD=Trifield
After a short delay the display will revert to the normal display of
DSP preset and volume.
Changing the DSP preset for a source