Meridian Audio 568 - Manual (Page 97)

90
Configuring the digital surround processor using a computer
To configure the source options
● Select the source in the list of sources.
● Click the Options tab.
● Select Source exists if you want to use this source.
This section describes how to use the Meridian Configuration
program to configure the sources provided by the digital
surround processor.
To set up sources
● Click the Sources icon in the left-hand panel of the Meridian
window.
The right-hand panel shows a list of the 12 sources that are
available. For each source you can display two pages of settings
by clicking on the Options or Advanced tabs.
Setting up sources