Meridian Audio 568 - Manual (Page 14)

Introduction
7
Control 2 x Meridian Comms.
9-pin D connector for RS232 PC setup
and control.
Dimensions 321mm x 88mm x 332mm
(12.7" x 3.5" x 13.1") (W x H x D).
Weight 5kg (10lb).
Meridian Audio reserves the right to amend product
specifications at any time.
Available accessories
The following accessories are available from your dealer.
Meridian 511 S-patch Box
The Meridian 511 S-patch box provides a convenient way to
interconnect the S leads between up to eight Meridian DSP
digital loudspeakers. It is required if your 568 system includes
more than two DSP loudspeakers.
Meridian 519 Demodulator
To take advantage of Dolby Digital on LaserDisc you need the
Meridian 519 Demodulator, which converts the LaserDisc
RF output to a bitstream which can be fed to the 568. The
519 Demodulator automatically senses the presence of a Dolby
Digital signal, and can select the LaserDisc PCM or DTS digital
audio output when no Dolby Digital signal is available.