Standard parameters, Bass (dsp parameter), Centre (dsp parameter) – Meridian Audio 568 User Manual
Page 33: Bass, Centre, Lipsync, Phase, R delay, Rear, S delay
Defining your own presets
26
Parameter
Range
Default
What it changes
Treble * †
-10dB to +10dB
+0dB
The slope of the frequency response.
Bass * †
-5dB to +5dB
+0dB
The bass response.
Phase * †
+ or -
+
The phase of all loudspeakers.
Balance
<10 to 10>
<0>
The L-R balance.
Centre
-3.0dB to +3.0dB
+0.0dB
The level of the centre.
Depth
-2.5ms to +5.0ms
+0.0
The delay of the centre.
Rear
-30dB to +10dB
+0dB
The level of the rears.
Sides
-30dB to +10dB
+0dB
The level of the sides.
R Delay ‡
0ms to 30ms
15.0ms
The delay of the rears.
S Delay ‡
0ms to 30ms
15.0ms
The delay of the sides.
LipSync
0ms to 30ms
0ms
The sync. delay.
OSD *
Off, Low, Med, High
Low
The position of the on-screen display.
* These parameters apply to all DSP presets.
† These parameters appear on the speakers if you are using DSP loudspeakers.
‡ These parameters have a range of 0ms to 15ms for 5.1 Movie presets and a range of 15ms to 30ms for Logic presets.
Standard parameters