Meridian Audio 568 - Manual (Page 119)

112
Troubleshooting
Meridian Configuration program problems
Preset options do not appear or are
not available
The options available when you are editing the DSP preset
parameters depend on the speaker layout you have defined in
Speakers.
❍ If you have any DSP speakers in the layout, treble and bass
are not available.
❍ The Speakers options for Centre, Sides, and Rears can only
be edited if your layout includes the corresponding speakers.
Meridian Configuration program
repeatedly fails to talk to the product
❍ Check that you have selected a COM port.
❍ Check that no other program currently running is using the
COM port.
❍ Check that it is connected correctly.
❍ Turn off the 568 for a few seconds and turn back on, then
retry.
❍ Quit from all other programs and retry.
❍ Reboot the computer and retry.
❍ Ensure you are using the serial lead supplied with the product,
or a null modem cable.
❍ If you are using a laptop try turning off the screensaver or
power management software.