Farallon Communications 612 - Manual (Page 66)

5-2 Netopia ISDN Modem User’s Guide
Configuration using a Macintosh computer
To configure the Netopia ISDN Modem for a Macintosh computer:
Steps 1 to 2:
Installing the software
1. Create a folder on your hard disk for the Netopia files and
assign a name to the folder (for example, “Netopia ISDN
Modem”).
2. Inser t the Netopia ISDN Modem Configuration Software for
Macintosh diskette into the diskette drive and copy the files by
selecting them and dragging them to the folder you created.
Steps 3 to 6:
Selecting the serial port
options
3. Open the Netopia ISDN Modem folder and double-click the
ISDN Setup icon. The Communication Setup dialog box
appears.
4. From the Serial Por t pop-up menu, choose the serial por t to
which the Netopia ISDN Modem is connected. If you want to
use an alternate serial por t device, such as the Por t Juggler
from Momentum, be sure to set the por t according to the
device manufacturer’s instructions.
Note: Other devices, such as serial expansion cards, may not
work properly with the ISDN Setup application if the devices
require use of the Serial Por t Manager or the Comm Toolbox. To
configure the Netopia ISDN Modem using the ISDN Setup
application, attach the ISDN modem directly to the printer or
modem por t. You may still be able to use the alternate serial
devices with the ISDN modem and your application software.