GE GFK-2489 - Manual (Page 123)

GFK-2489 Chapter 5 Sample Configurations 5-9
5
11. The next screen prompts for the data buffer size and inter-packet frame delay.
Press A to select Buffer Size. Press SPACE to cycle through the buffer size
options until “256” is displayed. Press ENTER to accept the Buffer Size.
Press B to select Inter Frame Delay. Press SPACE to cycle through the options
until “4 Character Times” is displayed. Press ENTER to accept the Inter Frame
Delay. Then press N to continue.
Serial Configuration Wizard Menu
Please choose the appropriate value for the Buffer Size
and the Inter-Frame Delay between each serial message.
A) Buffer Size 256 Bytes
B) Inter-Frame Delay 4 Character Times
B) Continue Wizard
Select a letter to configure an item, <ESC> for prev menu, ‘Q’ to quit wizard
12. The next screen prompts for the Port Status. Press A to select Port
Status. Press SPACE to toggle between “enabled” and “disabled”. Press ENTER
when “enabled” is displayed. Then press N to continue.
Serial Configuration Wizard Menu
Please choose whether or not you would like to
enable this serial port for data communication.
A) Port Status enabled
B) Continue Wizard
Select a letter to configure an item, <ESC> for prev menu, ‘Q’ to quit wizard