GE GFK-2489 - Manual (Page 92)

GFK-2489 Chapter 3 AP Management 3-59
3
itself to be malfunctioning. (A system must have at least one associated Remote to be
functional.)
Lack of Associated Remotes Exceeded Threshold Menu
Configuration Options for Lack of Associated Remotes
A) Lack of Remotes for 500 seconds
Select a letter to configure an item, <ESC> for the prev menu
▪ Packet Receive Errors Exceeded Threshold—This selection bringsup another screen (see
Packet Rx Errors Exceeded Threshold Menu
below) where you can specify the number of
packet errors that must be exceeded in a given time frame before a redundant AP
considers itself to be malfunctioning.
▪ Lack of Remotes for—number of seconds that a redundant AP waits before considering
itself to be malfunctioning.
Packet Rx Errors Exceeded Threshold Menu
This menu contains two settings relating to Packet Receive errors. One setting sets the
number of missed packets, and the other sets a time interval after which an error is declared.
The settings work together, and both criteria must be met before a redundancy switchover
occurs.
Packet Receive Errors Exceeded Threshold Menu
Configuration Options for Packet Receive Errors
A) Maximum Receive Errors 300
B) Receive Error Count Interval 300 seconds
Select a letter to configure an item, <ESC> for the prev menu
These configuration settings are intended for data-intensive applications and must be
customized for your specific application.