GE GFK-2489 - Manual (Page 174)

GFK-2489 Chapter 8 Technical Reference 8-13
8
Physical Interface
Ethernet Port: 10BaseT, RJ-45, 10 Mbps
Serial Port: RS-232/V.24, RJ-45, DCE
1,200-115,200 bps asynchronous
Antenna Connector: TNC female
LED Indicators: LAN (AP), ETH (Remote), COM1, COM2, PWR, LINK
Data Characteristics
IEEE (Institute of Electrical and Electronic Engineers) 802.3 (single device at
Remote) (Ethernet)
IP or Ethernet (DHCP, ICMP (Internet Control Message Protocol), UDP, TCP,
ARP) Protocols Supported:
Encapsulation over IP (tunneling) for serial async multidrop protocols,
including MODBUS, DNP.3, Bisync, BSAP, DF1, TotalFlow, Poll Select
Transceiver Management
Methods Supported (AP): HTTP (embedded Web server)—pending
Telnet • Local console via COM1 port
SNMPv1/2/3. MIB II, Enterprise MIB—pending
SYSLOG
NETview MS
TM —pending
Methods Supported (Remote): Local console via COM1 port
Environmental
Temperature Range: -40C to +70C (-33.8F to +158F)
Humidity: 95% at +40° C (104° F); non-condensing
Input Power: 6.0*–30VDC (13.8VDC nominal)
*Measured at the radio connector, not the source
Power Consumption: 7.05 Watts maximum at 1 Watt RF output (See below for details by model
and voltage)
Transmit:
900 MHz AP: 1175 mA at 6VDC 525 mA at 13.8VDC 270 mA at 30VDC
900 MHz Remote: 1025 mA at 6VDC 600 mA at 13.8VDC 240 mA at 30VDC
2400 MHz AP: 1091.7 mA at 6VDC 488.5 mA at 13.8VDC 253.3 mA at 30VDC
2400 MHz Remote: 941.7 mA at 6VDC 433.8 mA at 13.8VDC 223.3 mA at 30VDC
Receive:
900 MHz AP: 510 mA at 6VDC 220 mA at 13.8VDC 115 mA at 30VDC
900 MHz Remote: 260 mA at 6VDC 120 mA at 13.8VDC 65 mA at 30VDC
2400 MHz AP: 533.3 mA at 6VDC 230.1 mA at 13.8VDC 119.7 mA at 30VDC
2400 MHz Remote: 283.3 mA at 30VDC 130.1 mA at 13.8VDC 69.7 mA at 30VDC
Sleep (all remotes): 130 mA at 6VDC 15 mA at 12VDC 8 mA at 30VDC
Shutdown (all remotes): 0.37 mA at 6VDC
0.55 mA at 12VDC
0.78 mA at 30VDC