GE GFK-2489 - Manual (Page 29)

2-8 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489
2
Set Key AP Parameters
The table below lists key AP operating parameters, their default settings, and their
values or range. Typi
cally, these are the only settings that need to be set or reviewed
for a basic check of the radio system. A complete list of AP commands appears in
chapter 3, AP Management.
Menu Item Management System
Location
Default Values or Range
IP Address Main Menu >> Network
Configuration > IP
Configuration 192.168.1.1 Contact your Network
Administrator.
If IP Address Mode
(below) is set to Dynamic,
IP Address is configured
automatically.
IP Address
Mode Main Menu >> Network
Configuration > IP
Configuration Static Static | Dynamic
IP Netmask Main Menu >> Network
Configuration > IP
Configuration 255.255.0.0
requirements Settable per customer
Net Address Main Menu >> Network
Configuration > Wireless
MAC Configuration 9999 1-15 alphanumeric
characters*
Menu Item Management System
Loca- Default
tion Values or Range
RF Output
Power (non-
ETSI) Main Menu >> Radio
Configuration > 2.4 GHz:
27 dBm 900 MHz: 30 dBm
2.4 GHz: 17-27 dBm 900 MHz: 20–30 dBm
RF Output
Power (ETSI) Main Menu >>
Radio Configuration > 2.4 GHz: 20 dBm 2.4 GHz: 10-20 dBm
Password
Changes Main Menu >>
Security Configuration >
User Passwords Administrator Password:
admin (lower case)
Guest Password:
guest (lower case) 1–8 alphanumeric
characters Passwords are
case sensitive; can be
mixed case
* We recommend setting Net Address to the last four digits of the AP serial number to reduce
the chance of conflict with other nearby TS Wireless systems.