GE GFK-2489 - Manual (Page 39)

3-6 TranSphere TS Wireless Extended Range IP Networking Transceivers – January 2008 GFK-2489
3
If the radio is powered up or restarted while connected to a terminal, a series of pages of
text relating to the startup of the internal microcomputer is displayed. Wait for the log-in
screen before proceeding.
4. Press ENTER to receive the login prompt.
5. Enter the username (the default username is admin). Press ENTER .
6. Enter your password (the default password is admin). (For security, your password
keystrokes do not appear on the screen.) Press ENTER. Passwords are case sensitive.
Do not use punctuation marks. You may use up to eight alphanumeric characters.
The Starting Information Screen is displayed. From here, you can review basic information
about the radio, or press G to proceed to the Main Menu.
Starting Information Screen
Device Name
IP Address 169.254.0.2
Device Status Operational
Associated Remotes 1
Location
Serial Number 1205683
Uptime 2 days, 01 hours
Current Firmware 2.3.1
Current User admin
Press ‘G’ to go to Main Menu
Starting a Telnet Session
This method requires that you know the IP address of the radio beforehand. If you do not
know the address, use the Local Console method (above) and access the Starting Information
Screen
. The address is displayed on this screen.
1. Connect a PC to the LAN port on the radio, either directly or via a network. If connecting
directly, use an Ethernet crossover cable; if connecting via a network, use a straight-
through cable. The LAN LED lights to indicate an active connection.
When using a Local Area Network (LAN) to access the radio, it may be necessary to
change the computer IP access to the LAN in order to be compatible with the TS Wireless
radio (compatible subnets). You can identify or verify the radio IP address by using a
Local Console session to communicate with the TS Wireless radio through its COM 1 port
and viewing the
Starting Information Screen
.