Maxon Telecom MODMAX MM-6280IND - Manual (Page 47)

HSDPA Standard At Commands Page 47 of 61 Version 1.2
[,<Traffic handling
priority> ]]]]]]]]]]]]]
+CGEQREQ?
+CGEQREQ: <cid>, <Traffic class> ,<Maximum bitrate
UL> ,<Maximum bitrate DL> ,<Guaranteed bitrate UL>
,<Guaranteed bitrate DL> ,<Delivery order> ,<Maximum
SDU size> ,<SDU error ratio> ,<Residual bit error
ratio> ,<Delivery of erroneous SDUs> ,<Transfer
delay> ,<Traffic handling priority>
[<CR><LF>+CGEQREQ: <cid>, <Traffic class> ,<Maximum
bitrate UL> ,<Maximum bitrate DL> ,<Guaranteed
bitrate UL> ,<Guaranteed bitrate DL> ,<Delivery
order> ,<Maximum SDU size> ,<SDU error ratio>
,<Residual bit error ratio> ,<Delivery of erroneous
SDUs> ,<Transfer delay> ,<Traffic handling priority>
[…]]
+CGEQREQ=?
+CGEQREQ: <PDP_type>, (list of supported <Traffic
class>s) ,(list of supported <Maximum bitrate UL>s),
(list of supported <Maximum bitrate DL>s), (list of
supported <Guaranteed bitrate UL>s), (list of
supported <Guaranteed bitrate DL>s),(list of
supported <Delivery order>s) ,(list of supported
<Maximum SDU size>s) ,(list of supported <SDU error
ratio>s) ,(list of supported <Residual bit error
ratio>s) ,(list of supported <Delivery of erroneous
SDUs>s) ,(list of supported <Transfer delay>s)
,(list of supported <Traffic handling priority>s)
[<CR><LF>+CGEQREQ: <PDP_type>, (list of supported
<Traffic class>s) ,(list of supported <Maximum
bitrate UL>s), (list of supported <Maximum bitrate
DL>s), (list of supported <Guaranteed bitrate UL>s),
(list of supported <Guaranteed bitrate DL>s),(list
of supported <Delivery order>s) ,(list of supported
<Maximum SDU size>s) ,(list of supported <SDU error
ratio>s) ,(list of supported <Residual bit error
ratio>s) ,(list of supported <Delivery of erroneous
SDUs>s) ,(list of supported <Transfer delay>s)
,(list of supported <Traffic handling priority>s)
[…]]
Value
<cid>
: a numeric parameter which specifies a particular PDP context
definition (see +CGDCONT and +CGDSCONT commands).
The following parameters are defined in 3GPP TS 23.107 [46] -
<Traffic class>:
a numeric parameter that indicates the type of
application for which the UMTS bearer service is optimised.
0 - conversational
1 - streaming
2 - interactive