MITSUBISHI ELECTRIC 2033D SERIES UPS systems - Manual (Page 32)

MITSUBISHI ELECTRIC 2033D SERIES UPS
MITSUBISHI
ELECTRIC 2033D SERIES UPS
OWNERS / TECHNICAL MANUAL
Page Number:
2-13
2.6 External communication connector
This is an RS232C port for “DiamondLink”* monitoring software.
The layout of connector is shown in Figure 2.18.
FIGURE 2.18 External communication connector (NEC Class2)
Pin 1. : Not used
Pin 2. RXD : Receive data
Pin 3. TXD : Transmit data
Pin 4. : Not used
Pin 5. GND : Signal ground
Pin 6. : Not used
Pin 7. : Not used
Pin 8. : Not used
Pin 9. : Not used
* Consult MITSUBISHI ELECTRIC AUTOMATION, INC. for details on “ DiamondLink ”
monitoring software and its capabilities.
D-SUB 9Pin (male)
PCB IOAU-05
1
2
3
4
5
6
7
8
9