MACKIE HDR24/96 - Manual (Page 164)

HDR 24/96
Appendix B – List of Parameters and How They’re Saved
Setup Parameters – What’s Saved and When
The HDR24/96 has many setup and configuration parameters and preferences, some of which you
must set before use, others that you set in the course of working through your project. Some of these
parameters remain as defaults until changed, some stick with the Project but revert to the original
settings when you open a new project, others return to a factory default state whenever you switch
projects or power up. This table lists all the parameters and control states, indicating under what
circumstances they’re saved, and their default state.
Global Preferences
The current setting of these parameters and preferences become defaults. Each time you power up the
HDR24/96, they come up in the same state as you last set them. They retain their settings when you
switch Projects or Playlists, or open a new Project. Any change you make in these will be carried
over to the next power-up or the next Project.
Active Drive
Mouse Speed
Window Frames Color Scheme
Waveform Color Scheme
Footswitch Function
Remote Footswitch Function
FTP Server IP Address
FTP Server Subnet Mask
FTP Server Gateway Address
FTP Turbo Status (on/off)
MDS Network Channel
48-Track Mode (master/slave/off)
PDI-8 I/O card Input Sample Rate Conversion
PDI-8 I/O card Channel Status Bits (Professional/Consumer)
DIO-8 I/O card Input Format (ADAT/TDIF)
DIO-8 I/O card Output Format (ADAT/TDIF/Convert)
Generate MTC
Generate SMPTE
MMC Device ID A, B, and C
Sample Clock Source (Internal/Word/Video)
Half Speed Clock Input Mode (on/off)
Half Speed Clock Output Mode (on/off)
Time Code Source (SMPTE/MTC)
Backup Source Disk Drive (front panel function only)
Backup Destination Disk Drive (front panel function only)
Record Safe (on/off)
One Button Punch (on/off)
HDR 24/96 164