Multi-Tech Systems MVPFXS-16 - Manual (Page 138)

Operation and Maintenance MultiVOIP FXS User Guide
138
11. You must change the serverip value to the IP address of the computer on which the TFTP server program is located. To
change the serverip value, type setenv serverip a.b.c.d (where a, b, c, and d are the four octet values for the IP address of
the TFTP server) at the mvp-boot> prompt. Then press Enter.
Note: When using the setenv command, be careful in your spelling. If you mis-spell serverip as “seeverip” for example, the
ARMBoot program will create a new and useless variable entitled seeverip and will not change the value of the serverip
variable.