Multi-Tech Systems MVPFXS-16 - Manual (Page 73)

MultiVOIP FXS User Guide Technical Configuration
73
The table below describes all fields in the Call Signaling screen.
Call Signaling Parameter Definitions
Field Name Values Description
SIP Parameters
Signaling Port numeric Port number on which the MultiVOIP UserAgent software module will
be waiting for any incoming SIP requests. Default = 5060
Use SIP Proxy Y/N Allows the MultiVOIP to work in conjunction with a proxy server.
Proxy Parameters
Proxy Domain
Name / IP
Address n.n.n.n
where
n=0-255 Network address of the proxy server that the voip is using.
Append SIP
Proxy Domain
Name in User
ID Y/N When checked, the domain name of the SIP Proxy serving the MultiVOIP
gateway will be included as part of the User ID for that gateway. If
unchecked, the SIP Proxy’s IP address will be included as part of the User
ID instead of the SIP Proxy’s domain name.
Port Number Logical port number for proxy communications.
User Name Values : alphanumeric
Description : Identifier used when proxy server is used in network. If a proxy server is
used in a SIP voip network, all clients must enter both a User Name and a Password
before being allowed to make a call.
Password Values : alphanumeric
Description : Password for proxy server function. See “User Name” description above.
Re-
Registration
Time Values : numeric (in seconds)
Description : This is the timeout interval for registration of the MultiVOIP with a SIP
proxy server. The time interval begins the moment the MultiVOIP gateway registers
with the SIP proxy server and ends at the time specified by the user in the Re-
Registration Time field (this field). When/if registration lapses, call traffic routed
to/from the MultiVOIP through the SIP proxy server will cease. However, calls in
progress will continue to function until they end.