Multi-Tech Systems MVPFXS-16 - Manual (Page 31)

MultiVOIP FXS Quick Start Guide Phonebook Starter Config.
31
4. In the “Add Prefix” field, enter any digits that must be dialed from your local voip to gain access to the
PSTN.
North America,
Long-Distance Example
Euro, National Call
Example
Seattle-Chicago system.
On Seattle PBX, “9” is used to
get an outside line.
Answer: 9 is prefix to be
added by local
(Seattle) voip.
London/Birming. system.
On London PBX, “9” is used
to get an outside line.
Answer: 9 is prefix to be
added by local
(London) voip.
Euro, International Call Example
Rotterdam/Bordeaux system.
On Rotterdam PBX, “9” is used to get an outside line.
Answer: 9 is prefix to be added by local (Rotterdam)
voip.
5. In the “Channel Number” field, enter “Hunting.” A “hunting” value means the voip unit will assign the
call to the first available channel. If desired, specific channels can be assigned to specific incoming calls
(i.e., to any set of calls received with a particular incoming dialing pattern).
6. In the “Description” field, it is useful to describe the ultimate destination of the calls. For example, in a
New York City voip system, “incoming calls to Manhattan office,” might describe a phonebook entry, as
might the descriptor “incoming calls to NYC local calling area.” The description should make the routing
of calls easy to understand. (40 characters max.)
North America,
Long-Distance Example
Euro, National Call
Example
Seattle-Chicago system.
Possible Description:.
Free Seattle access, all
employees
London/Birming. system.
Possible Description:.
Local-rate London access,
all empl.
Euro, International Call Example
Rotterdam/Bordeaux system.
Possible Description :. Local-rate Rotterdam access, all
empl.
7. Repeat steps 2-6 for each inbound phonebook entry. When all entries are complete, go to step 8.
8. Click OK to exit the inbound phonebook screen.
9. Click on Save & Apply. Click OK. Then click Reboot Voip.
Your starter inbound phonebook configuration is complete.