Multi-Tech Systems MVPFXS-16 - Manual (Page 29)

MultiVOIP FXS Quick Start Guide Phonebook Starter Config.
29
6. In the “Remove Prefix” field, enter the initial PBX access digit (“8” or “9”).
North America,
Long-Distance Example
Euro, National Call
Example
Seattle-Chicago system.
Answer
: enter 8 in “Remove
Prefix” field of
Seattle Outbound
Phonebook.
London/Birming. system.
Answer
: enter 9 in “Remove
Prefix” field of
London Outbound
Phonebook.
Euro, International Call Example
Rotterdam/Bordeaux system.
Answer
: enter 9 in “Remove Prefix” field of Outbound
Phonebook for Rotterdam voip.
Some PBXs will not ‘hand off’ the “8” or “9” to the voip. But for those PBX units that do, it’s important to enter the
“8” or “9” in the “Remove Prefix” field in the Outbound Phonebook. This precludes the problem of having to make
two inbound phonebook entries at remote voips, one to account for situations where “8” is used as the PBX access
digit, and another for when “9” is used.
7. If you intend to use a SIP Proxy, enter the relevant information in the Call Signaling screen.
8. Enter the IP address of the MultiVOIP that you want to call.
9. Click OK to exit from the Outbound Phonebook Add Entry screen.