Multi-Tech Systems MVPFXS-16 - Manual (Page 99)

MultiVOIP FXS User Guide Phone Book Configuration
99
These seven phone books are shown below.
Phone Book for Series I Analog VOIP Host Unit (Site B)
VOIP Dir #
-OR-
Destination
Pattern IP Address Channel Comments
102 200.2.9.8 2 Site B, FXS channel.
101 200.2.9.8 1 Site B, FXO channel.
4xx 200.2.9.6 1 Site E FXS channel.
201 200.2.9.7 1 Site A, FXS channel.
1615
xxx
xxxx
200.2.9.9 0
(Note 2.)
Gives remote voip users access to local PSTN
of Site D (Pierre, SD, area code 615).
3xxx
(Note 1.)
200.2.9.9 0 Allows remote voip users to call all PBX
extensions at Site D (Pierre, SD) using only
four digits.
1402
xxx
xxxx
(Note 1.)
200.2.9.5 0 Gives remote voip users access to local PSTN
of Site F (Lincoln, NE; area code 402).
140226374xx
(Note 1)
(Note 3)
200.2.9.5 0 Gives remote voip users access to key phone
system extensions at Site F (Lincoln).
Note 1. The “x” is a wildcard character.
Note 2. By specifying “Channel 0,” we instruct the MVP2400/2410 to choose any
available data channel to carry the call.
Note 3. Note that Site F key system has only 30 extensions (x7400-7429). This
destination pattern (140226374xx) actually directs calls to 402-263-7430 through
402-263-7499 into the key system, as well.
This means that such calls, which belong on the PSTN, cannot be completed.
In some cases, this might be inconsequential because an entire exchange (fully
used or not) might have been reserved for the company or it might be
unnecessary to reach those numbers. However, to specify only the 30 lines
actually used by the key system, the destination pattern 140226374xx would
have to be replaced by three other destination patterns, namely 1402263740xx,
1402263741xx, and 1402263742xx. In this way, calls to 402-263-7430 through
402-263-7499 would be properly directed to the PSTN. In the Site D outbound
phonebook, the 30 lines are defined exactly, that is, without making any
adjacent phone numbers unreachable through the voip system.