Multi-Tech Systems MVPFXS-16 - Manual (Page 139)

MultiVOIP FXS User Guide Operation & Maintenance
139
12. To confirm that the TFTP server IP address was indeed changed to the value you want, type printenv at the mvp-boot>
prompt and then press Enter.
13. If necessary, you can also change the IP address of the voip
(which is the ipaddress field in the ARMBoot environment)
and the IP address of the network gateway
(which is the gatewayip field in the ARMBoot environment)
For ipaddr, type setenv ipaddr a.b.c.d (where a, b, c, and d are the four octet values for the IP address of the TFTP server)
at the mvp-boot> prompt. Then press Enter.
For gatewayip, type setenv gatewayip a.b.c.d (where a, b, c, and d are the four octet values for the IP address of the TFTP
server) at the mvp-boot> prompt. Then press Enter.