Multi-Tech Systems MVPFXS-16 - Manual (Page 91)

MultiVOIP FXS User Guide Phone Book Configuration
91
Enter Inbound PhoneBook data for your MultiVOIP. The fields of the Inbound Phone Book Add Entry
screen are described in the table below.
Inbound Phone Book Add Entry screen:
Field Definitions
Field Name Values Description
Accept Any
Number Values : Y/N
Description: When checked, “Any Number” appears as the value in the Remove Prefix field.
The Any Number feature of the Inbound Phone Book does not work when an external
routing device is used (Proxy for SIP protocol).
When no external routing device is used. If Any Number is selected, calls received from
phone numbers not matching a listed Prefix (shown in the Remove Prefix column of the
Inbound Phone Book) will be admitted into the voip on the channel listed in the Channel
Number field. “Any Number” can be used in addition to one or more Prefixes.
Remove Prefix dialed digits portion of dialed number to be removed before completing call to destination
Add Prefix dialed digits digits to be added before completing call to destination
Channel
Number 1-24, or
“Hunting”
or 1-8
or 1-16
depending
on model Channel number to which the call will be assigned as it enters the local
telephony equipment . “Hunting” directs the call to any available channel.
Description -- Describes the facility or geographical location at which the call originated.
Register with
SIP Proxy
Y/N
*Must be
enabled in
Call
Signaling
Configuration
screen.
When checked, the value in the Remove Prefix field will be registered with
the external SIP proxy routing device. The IP address of the external routing
device must be set in the Phone Book Configuration screen.
In a SIP voip system, gateways can register with the SIP Proxy.