Multi-Tech Systems MVPFXS-16 - Manual (Page 88)

Phone Book Configuration MultiVOIP FXS User Guide
88
The fields of the Outbound Phone Book Add Entry screen are described in the table below.
Outbound Phone Book Add Entry screen: Field Definitions
Field Name Values Description
Accept Any
Number Y/N When checked, “Any Number” appears as the value in the Destination Pattern
field.
The Any Number feature works differently depending on whether or not an
external SIP Proxy routing device is used.
When no external routing device is used. If Any Number is selected, calls to
phone numbers not matching a listed Destination Pattern will be directed to the
IP Address in the Outbound Phone Book Add Entry screen. “Any Number” can
be used in addition to one or more Destination Patterns.
When external routing device is used. If Any Number is selected, calls to phone
numbers not matching a listed Destination Pattern will be directed to the external
SIP proxy routing device. The IP Address of the external routing device must be
set in the Phone Book Configuration screen.
Destination
Pattern prefixes,
area codes,
exchanges,
line
numbers,
extensions Defines the beginning of dialing sequences for calls that will be connected to
another VOIP in the system. Numbers beginning with these sequences are
diverted from the PTSN and carried on Internet or other IP network.
Total Digits as needed This field currently disabled.
Number of digits the phone user must dial to reach specified destination.
Remove Prefix dialed digits Portion of dialed number to be removed before completing call to destination.
Add Prefix dialed digits Digits to be added before completing call to destination.
IP Address n.n.n.n
for
n = 0-255 The IP address to which the call will be directed if it begins with the destination
pattern given.
Description alpha-
numeric
Describes the facility or geographical location at which the call will be completed.