IBM Aptiva 2142 User Manual

Page 104

Advertising
background image

(continued)


A-1 system board, and J25 on the Type A-2 system board.

2. Check the hard disk drive jumper settings (see “Parts/Test Point

Locations” on page 5-1).

3. Check the voltages to the disk drive power connectors with the power

on (see “Power Supply” on page 2-34).

4. Try to correct the drive setting in the 3 (SETUP) option in the Setup

Utility.

5. Review the IDE Drive Info under Hardware Info in the Setup Utility.

6. Restart the system and check the Setup Utility.

7. In the Setup Utility, check that the correct drive size is set for the

flagged drive shown in the Installed Devices list.

If any drive is flagged as

Not Installed

, check the connector and

cable for that drive.

If the first drive is flagged as

Not Installed

, replace the primary

drive.

If all drives are flagged as

Not Installed

, replace the primary drive.

If any drive (other than the first drive) is flagged as

Not Installed

,

replace that drive.

If the problem remains, check the continuity on the drive cable and
replace the cable if necessary. If that does not fix the problem,
replace the system board.

8. If an upgrade processor is installed, make sure that the processor speed

shown is correct.

Note: The CD/DVD-ROM must be the last device installed and jumpers

set correctly to be listed in the Setup Utility. See “Hard Disk
Drive Jumper Settings” on page 5-10.

Also ensure the CD/DVD-ROM cable is installed in connector
J30 on the Type A-1 system board and in connector J11 on the
Type A-2 system board.

If any other adapter or device is flagged as

Not Installed

, run the

Setup program.

Check to see if any adapter or device is set to a conflicting address with any
other adapter or device. Also be sure that any adapter or device missing
from the list is not set to

Disabled

.

Note: If you cannot add a missing adapter or device to the list, the

diagnostic code for the missing adapter or device is not on the
diagnostic CD. Run the diagnostics provided with that device.

2-48

Advertising
This manual is related to the following products: