IBM Aptiva 2142 - Manual (Page 83)

Table 2-1 (Page 17 of 23). POST and Diagnostics and Utilities Index
for Symptoms, Messages, Error Codes, or Beeps
Symptoms, Messages, Error
Codes, or Beeps Action/FRU
Error Codes
107 - System board, processor
update error. (A-2 system board
only) Flash BIOS
System Board
10X - System board error or
continuous beep. System Board
110 - System board parity error. “Memory” on page 2-37.
DIMMs
System Board
111 - I/O channel parity error. “Memory” on page 2-37.
I/O channel memory
System Board
114 - External ROM checksum
error. Adapter Card
System Board
129 - Cache memory error “Memory” on page 2-37.
For A-1 system board:
System Board
For A-2 system board:
Processor
12X - Processor error. Run the Setup Utility; see “POST Error
Codes” on page 2-3.
Processor
System Board
13X - System board error. Run the Setup Utility; see “POST Error
Codes” on page 2-3.
Processor
System Board
151 - Real-time clock failure System board
161 - Low CMOS battery. CMOS clock/battery (if less than 2.8 V dc)
Run the Setup Utility; see “POST Error
Codes” on page 2-3.
System Board
Check Procedures 2-27