IBM Aptiva 2142 - Manual (Page 94)

(continued)
006 (continued)
(From step 003)
– Follow the screen instructions to run the Memory tests.
DID THE MEMORY TESTS COMPLETE WITHOUT AN ERROR?
Yes No
007
– Replace each DIMM, one at a time, with a known-good DIMM of the
same size and type.
– If the problem goes away, the last DIMM replaced is defective. If all
DIMMs have been replaced and the problem remains, replace the
system board.
008
– The system memory is now functioning correctly. If you suspect an
intermittent problem, run the Memory and System board tests multiple
times.
2-38