IBM Aptiva 2142 - Manual (Page 169)

Safety Inspection Guide
General Guidelines
The purpose of this Safety Inspection Guide is to help you identify possible
unsafe conditions on machines that are being inspected for a Maintenance
Agreement. Each machine has needed items installed to provide the
operators and service personnel with an acceptable level of safety. This
guide lists only these items. Good judgment should be used to identify
possible safety conditions not covered by this Safety Inspection Guide.
If any unsafe conditions are present, you must find out how serious the
hazard is and if you can continue before you correct the hazard.
All current IBM Aptiva service supplements outlining feature/model changes,
along with the machine history, should be reviewed.
Check the following items:
Damaged, missing, or changed parts, especially in the area of the
On/Off switch and the power supply.
Damaged, missing, or changed covers.
Possible safety exposure from any non-IBM attachments.
Copyright IBM Corp. 1997, 1998 6-1