IBM Aptiva 2142 - Manual (Page 179)

Asm– Part
Index Number Units Description
4–1 Machine Type 2142
Note See the Appendix B,
“Model/Monitor Configurations and
FRU Part Numbers” on page B-1 for
model specifications.
–1 R Chassis Assembly
–NS 76H6367 1 Amplifier Tier 1
–NS 12J5840 1 Amplifier Tier 2
–NS 76H6351 1 Cable, Power Switch to System Board
–NS 76H6353 1 Cable, Amplifier Signal to System
Board
–NS 76H6355 1 Cable, Amplifier Audio to System
Board
–NS 07H1496 1 Cable, Host Card to System Board
Audio
–NS 12J5919 1 Cable, Host Card to System Board
LED
–NS 76H6347 1 Cable, Host Card to System Board
Signal
–2 12J6487 1 Fan Assembly
All system board FRUs are shipped
without processor or DIMMs. When
replacing a system board, remove all
FRUs from the original system board
and install them on the new system
board.
Attention - The amplifier card BIOS in
the system board must match the
amplifier card installed in the
computer. See “Amplifier Card BIOS”
on page 1-16.
–3 93H5148 1 System Board - Type A-1
–3 93H5225 1 System Board - Type A-2
–3 93H7524 1 System Board - Type A-2 with TV
OUT 'J13'
–NS 93F0063 1 Lithium Battery
–NS 33F8354 1 Lithium Battery (EMEA)
–NS 93F0067 1 Jumper Kit
–NS 12J6296 1 Screw Kit
Parts Catalog 7-9