IBM Aptiva 2142 - Manual (Page 107)

004 (continued)
DOES THE SYSTEM FAIL TO WAKE UP WHEN THE- 'WAKE UP
THE COMPUTER WHEN THE PHONE RINGS' FEATURE IS
ENABLED?
Yes No
005
– The Wake Up on Ring feature is working normally. If the
symptom remains, go to “Index of Symptoms, Messages,
Error Codes, or Beeps” on page 2-9.
006
– Select 'Start' from the Desktop.
– Select 'Settings'.
– Select 'Control Panel'
– Double Click on the 'Power' icon.
– Click on 'Advanced'.
– Click check box 'Wake Up the Computer When the Phone Rings.'
DOES THE SYSTEM WAKE UP WHEN-'WAKE UP THE COMPUTER
WHEN THE PHONE RINGS' IS ENABLED?
Yes No
007
Note: If the phone lines attached to the modem have
experienced a high voltage surge (struck by lightning, for
example), first replace the modem and go to Step 001
on page 2-50.
Replace the system board.
008
The modem is functioning correctly.
009
– If the audio tones are incorrect, replace the modem.
– Power-off the system unit.
– Plug the modem adapter card into a different card slot.
– Power-on the system unit.
– Run the modem tests.
(Step 009 continues)
Check Procedures 2-51