Intel IA-32 - Manual (Page 378)

9-4 Vol. 3A
PROCESSOR MANAGEMENT AND INITIALIZATION
MXCSR Pwr up or Reset: 1F80H
INIT: Unchanged Pentium III processor only-
Pwr up or Reset: 1F80H
INIT: Unchanged NA
GDTR, IDTR Base = 00000000H
Limit = FFFFH
AR = Present, R/W Base = 00000000H
Limit = FFFFH
AR = Present, R/W Base = 00000000H
Limit = FFFFH
AR = Present, R/W
LDTR, Task
Register Selector = 0000H
Base = 00000000H
Limit = FFFFH
AR = Present, R/W Selector = 0000H
Base = 00000000H
Limit = FFFFH
AR = Present, R/W Selector = 0000H
Base = 00000000H
Limit = FFFFH
AR = Present, R/W
DR0, DR1, DR2,
DR3 00000000H 00000000H 00000000H
DR6 FFFF0FF0H FFFF0FF0H FFFF0FF0H
DR7 00000400H 00000400H 00000400H
Time-Stamp
Counter Power up or Reset: 0H
INIT: Unchanged Power up or Reset: 0H
INIT: Unchanged Power up or Reset: 0H
INIT: Unchanged
Perf. Counters
and Event Select Power up or Reset: 0H
INIT: Unchanged Power up or Reset: 0H
INIT: Unchanged Power up or Reset: 0H
INIT: Unchanged
All Other MSRs Pwr up or Reset:
Undefined
INIT: Unchanged Pwr up or Reset:
Undefined
INIT: Unchanged Pwr up or Reset:
Undefined
INIT: Unchanged
Data and Code
Cache, TLBs Invalid Invalid Invalid
Fixed MTRRs Pwr up or Reset: Disabled
INIT: Unchanged Pwr up or Reset: Disabled
INIT: Unchanged Not Implemented
Variable MTRRs Pwr up or Reset: Disabled
INIT: Unchanged Pwr up or Reset: Disabled
INIT: Unchanged Not Implemented
Machine-Check
Architecture Pwr up or Reset:
Undefined
INIT: Unchanged Pwr up or Reset:
Undefined
INIT: Unchanged Not Implemented
APIC Pwr up or Reset: Enabled
INIT: Unchanged Pwr up or Reset: Enabled
INIT: Unchanged Pwr up or Reset: Enabled
INIT: Unchanged
NOTES:
1. The 10 most-significant bits of the EFLAGS register are undefined following a reset. Software should
not depend on the states of any of these bits.
2. The CD and NW flags are unchanged, bit 4 is set to 1, all other bits are cleared.
3. Where “n” is the Extended Model Value for the respective processor.
4. If Built-In Self-Test (BIST) is invoked on power up or reset, EAX is 0 only if all tests passed. (BIST can-
not be invoked during an INIT.)
5. The state of the x87 FPU and MMX registers is not changed by the execution of an INIT.
Table 9-1. IA-32 Processor States Following Power-up, Reset, or INIT (Contd.)
Register
Pentium 4 and Intel Xeon
Processor
P6 Family Processor Pentium Processor