0 operating instructions, 1 view button, 2 activate jets pump 1 – Jacuzzi J - 480 User Manual
Page 27: 3 activate jets pump 2, 4 selecting the desired massage action, 5 light on/off button, Operating instructions, View button, Activate jets pump 1, Activate jets pump 2
Page 23
J-400 Series
9.0 Operating Instructions
Your Jacuzzi® spa has a touch-sensitive control panel, massage selectors, and air
control knobs located on the top rim of the spa (page
). These controls let
you operate many of the special functions of your Jacuzzi spa. By familiarizing
yourself with the following information, you will be able to gain the full benefit
from using your spa .
9.1 View Button
Pressing this button inverts the main four-digit display on the
command center’s LCD screen to allow easy reading from either inside
or outside the spa.
9.2 Activate Jets Pump 1
The button labeled JETS 1 controls jets pump #1. Pressing this button
cycles jets pump #1 on and off.
9.3 Activate Jets Pump 2
The button labeled JETS 2 controls jets pump #2. Pressing this button
cycles pump #2 on and off.
Auto Turn Off — Anytime a pump has been manually turned on, it will auto-
matically turn off after approximately 20 minutes. If at this time you desire
more jet operation you may simply turn the pump(s) back on.
9.4 Selecting the Desired Massage Action
Your Jacuzzi spa is equipped to allow you to customize the
massage action you desire. Each model incorporates a massage
selector that allow you to customize the massage and perfor-
mance by diverting water between various jet systems. Simply
turn massage selector to position A (Combo), B, or C to divert water pressure to
various jet groups. Note: The massage selector valve(s) is designed to operate in
positions A (Combo), B, and C for optimum performance. It is considered normal
for sound levels within the valve to vary between positions due to the large
amounts of water flowing through it! For optimum filtration benefits, leave the
valve in position A when spa is covered. Select position B or C for maximum jet
performance during spa use.
9.5 Light On/Off Button
Pressing this button activates the logo, footwell IX Jet light, water-
fall lights, and optional exterior lights in sequence as follows:
high - medium - low - off. Note: Interior lights automatically turn off after 1
hour. Exterior lights are photocell activated.
B
C
A
B
C
A