Jacuzzi J - 480 - Manual (Page 43)

Page 39
J-400 Series
3. Press WARMER or COOLER button to change duration setting
as follows:
0 - 10 - 20 - 30 - 40 - 50 - 60 - 70 - 80 - 90 - 100 - 110 - 120 - OFF
Note: Selecting 0 in step 3 forces the change filter reminder icon to remain on
indefinitely.
4. Press DISPLAY button once to save changes and return to the stan-
dard water temperature display. Note: If no button is pressed within 30
seconds, all changes are recorded and the screen automatically returns to the
standard water temperature display.
12.0 Spa Maintenance
Proper and regular maintenance of your spa will help it retain its beauty and
performance. Your authorized Jacuzzi dealer can supply you with all the infor-
mation, supplies, and accessory products you will need to accomplish this.
12.1 Cleaning the Filter Cartridges
A programmable “Change Filter” reminder icon flashes on the control
panel display after a specified number days to remind you to clean the
skimmer filter and to check the polishing bag filter. This reminder must
be reset at each filter cleaning interval. Refer to section 11.7
(
page 38 ) for additional information and programming details. Your
new spa is equipped with an advanced 2-stage filtration system.
Fine debris are filtered by the circulation pump drawing water through the
ProClear™ skimmer and pleated filter cartridge 24 hours (unless programmed
otherwise). Large debris are filtered when either jets pump is running when the
spa is in use or during a programmed filter cycle. These pumps draw water from
footwell suction fitting and through a secondary water polishing bag filter. The
exclusive footwell “sweeper” suction fitting enhances filtration in the footwell
area by creating a “swirling” water motion to maximize particle agitation and
pickup.
To ensure optimum performance, the 24-hour ProClear™ skim-
ming filter cartridge (A) must be cleaned every three months and
replaced once a year. The secondary ProClear™ Plus polishing filter
bag (B) should be emptied weekly and replaced every 3 months.
To accomplish this, refer to the following filter cleaning procedure.
Note: Do not attempt to wash the polishing filter bag (B) or it will
come apart!
A B A B