Jacuzzi J - 480 - Manual (Page 7)

Page 3
J-400 Series
9. The water in a spa should never exceed 104°F (40°C). Water temperatures
between 100°F (38°C) and 104°F (40°C) are considered safe for a healthy
adult. Lower water temperatures are recommended for young children and
when spa use exceeds 10 minutes.
10. Since excessive water temperatures have a high potential for causing
fetal damage during the early months of pregnancy, pregnant or possibly
pregnant women should limit spa water temperatures to 100°F (38°C). If
pregnant, please consult your physician before using a spa.
11. Before entering the spa, the user should measure the water temperature
with an accurate thermometer since the tolerance of water temperature-
regulating devices may vary as much as +/- 5°F (2°C).
12. The use of alcohol, drugs, or medication before or during spa use may lead
to unconsciousness with the possibility of drowning.
13. Persons suffering from obesity or a medical history of heart disease, low
or high blood pressure, circulatory system problems, diabetes, infectious
diseases or immune deficiency syndromes should consult a physician before
using a spa. If you experience breathing difficulties in association with
using or operating your spa, discontinue use and consult your physician.
14. Persons using medication should consult a physician before using a spa
since some medication may induce drowsiness, while other medication may
affect heart rate, blood pressure, and circulation.
15. Always shower before and after using your spa. To reduce the possibility of
contracting a waterborne illness, always maintain water chemistry within
the parameters listed on the inside cover of this manual. If you or other
bathers are affected by such a condition, discontinue use and seek medical
attention.
IMPORTANT CSA SAFETY INSTRUCTIONS (CANADA ONLY)
When using this electrical equipment, basic safety precautions should always be
followed, including the following:
1. READ AND FOLLOW ALL INSTRUCTIONS.
2. A green colored terminal or a terminal marked G, Gr, Ground, Grounding
or the symbol* is located inside the supply terminal box or compart-
ment. To reduce the risk of electric shock, this terminal must be connected
to the grounding means provided in the electric supply service panel with
a continuous copper wire equivalent in size to the circuit conductors that
supply this equipment.