Jacuzzi J - 480 - Manual (Page 67)

Page 63
J-400 Series
19.9 Wireless Remote Battery Replacement Procedure
1. Start by removing the rubber cover to the remote.
(Figure A)
2. Turn the remote unit over and locate the battery door.
(Figure B)
3. Rotate the battery door, with a coin, counterclockwise until the
dot aligns with the Open arrow (Figure C).
4. Remove battery door using coin to pry the door upward
(Figure D).
5. Replace battery using CR2025 or equivalent
(Figure E).
6. Reinstall the battery cover, using the coin to close
(Figure F).
7. Reinstall rubber housing onto remote
(Figure G).
Note: Remote unit is water resistant not waterproof , therefore the unit
should never be left in the spa while the cover is on and spa is not in use.
Fig. A
2/3
LIGHT SNC AIR
SPA
JETS
1
Fig. A
2/3
LIGHT SNC AIR
SPA
JETS
1
105358 www.polyplanar.com Poly-Planar Inc. Warminster, PA 18974 (215) 675-7805 Made in China
OPEN CLOSED
Battery
Door
Fig. B
105358 www.polyplanar.com Poly-Planar Inc. Warminster, PA 18974 (215) 675-7805 Made in China
OPEN CLOSED
Battery
Door
Fig. B
OPEN CLOSED
Fig. C
OPEN CLOSED
Fig. C
OPEN CLOSED
Fig. D
OPEN CLOSED
Fig. D
OPEN CLOSED
CR2025
Fig. E
OPEN CLOSED
CR2025
Fig. E
OPEN CLOSED
Fig. F
OPEN CLOSED
Fig. F
2/3
LIGHT MODE
Hot Tub
JETS
1
Fig. G
2/3
LIGHT MODE
Hot Tub
JETS
1
Fig. G