4 pillow care, 5 maintaining the synthetic cabinet, 6 maintaining the cover – Jacuzzi J - 480 User Manual
Page 46: 7 winterizing, Pillow care, Maintaining the synthetic cabinet, Maintaining the cover, Winterizing, On the other hand, if it is hot outdoors, J-400 series
Page 42
J-400 Series
assure that no soap residue is left on the surface. This could cause severe sudsing
when the spa is refilled.
12.4 Pillow Care
Clean the four headrests in your spa as needed by wiping them with
a cloth with
soapy water
. It is not necessary to remove the headrests for cleaning.
To remove headrests for long term storage or replacement, grasp both ends of
each headrest and gently pull inward towards the center of the spa. To reinstall,
over mounting strip and press down until headrest mounting bracket emits a
“click” sound. Then adjust headrest height by simply moving up or down as
desired.
12.5 Maintaining the Synthetic Cabinet
The synthetic cabinet requires little or no maintenance of any kind. To clean,
simply wipe cabinet
with mild detergent soap solution and a clean towel
.
CAUTION: Never spray cabinet with a high pressure garden hose
for any reason since this action may induce an electrical short in the
spa’s electrical equipment.
12.6 Maintaining the Cover
Using the Jacuzzi insulating spa cover anytime the spa is not in use will signifi-
cantly reduce your operating costs, heat-up time, and maintenance require-
ments. To prolong the life of the cover, handle it with care and clean it regularly
using mild soap and water. Periodic treatments with a special conditioner devel-
oped for Jacuzzi spa covers will help protect against deterioration caused by UV
rays from the sun. Never allow anyone to stand or sit on the cover, and avoid
dragging it across rough surfaces.
12.7 Winterizing
Your Jacuzzi spa is designed to automatically protect itself against freezing when
operating properly. During periods of severe freezing temperatures, you should
check periodically to be certain that the electrical supply to the spa has not been
interrupted. In extreme, bitter cold weather (less than -20°F) verify
standard
mode
is set for 24-hour operation (sec. 11.1
Programming Filter/Circulation
Pump Run Time
, page
) and that standard mode is selected (sec. 10.3
Selecting Standard or Economy Mode
, page
) to protect
against damage to the
spa
.
If you do not intend to use your spa, or if there is a prolonged power outage
during periods of severe freezing temperatures, it is important that all water be
removed from the spa and equipment to protect against damage from freezing.