Spectra Logic 10000 - Manual (Page 85)

Chapter 6. Maintaining the Library
85
2. Swing the grill open (Figure 6-5).
3. Inspect the filter, replacing if necessary.
4. Close the grill, making sure that it snaps shut.
Changing Hosts
If you change the host system to which the library is attached, you will have to repeat
many of the steps described in previous chapters, including:
• Selecting a SCSI bus for the library
• Selecting the mode of library operation
• Setting up SCSI and power connections
• Adjusting drive emulation and library configuration
For lists and diagrams of the different SCSI cables available from Spectra Logic, see
SCSI Cables and Terminators on page 119.
Figure 6-5 Release the grill and swing it open.