Spectra Logic 10000 - Manual (Page 9)

9
1 Introduction
About This Guide
This guide describes the installation and operation of the Spectra 10000 library,
including troubleshooting information.
This guide addresses network administrators who maintain and operate their backup
systems. This guide assumes a familiarity with SCSI and/or Fibre Channel, as well as a
technical knowledge of tasks such as configuring operating systems, installing drivers,
and connecting cables.
Related Publications
These publications are also available from Spectra Logic:
• The Spectra 10000 Library Release Notes (P.N. 92844034) provides the most up-to-
date information about the library, drives, and media.
• The Spectra 10000 Library Developer Guide provides SCSI reference information
useful to application developers. It can be found on the Spectra Logic Web site at
http://www.spectralogic.com/support/index.cfm/fuseaction/displayProductDocs/.
Conventions Used in This Manual
This manual uses the following conventions to highlight extra information and to
emphasize important safety tips:
Note: Read the information marked Note for additional points or
suggestions about the topic or procedure being discussed.
Caution: Read the information marked Caution to learn ways to avoid
damaging the library, tape drives, or other equipment.
Warning: Read the information marked Warning to learn ways to avoid
personal injury.